Bw08 Gps Trackers With Relay For Car Truck Bike Auto Usage: Automotive

We are Distributing and Supplying BW08 GPS Trackers With Relay For Car Truck Bike Auto in Madurai Tamil Nadu India.


1 Year Subscription - Rs.650

Sim Card:

1 Year Subscription - 600



Product description:

Open We are a renowned name in the industry involved in offering optimum quality of Benway BW08 GPS Vehicle Tracker.



Other information:



the packing box to check whether the type of device is correct and whether the accessories are included or else please contact with your distributor 5.1.2

To test SIM card please install it into a normal GSM mobile and ensure it can send and receive SMS and enables for GPRS

5.1.3 SIM installation refer to below pictures




5.2 Notice of Installation:



To prevent theft of the Device the device should be installed as covertly as possible. Notice as following:

5.2.1 Avoid placing the Device close to higher power electrical devices such as reversing radar anti -theft device or other vehicle communication equipment.

5.2.2 The Device should be fixed into position with cable ties or wide double -side tape

5.2.3 Device has built-in GSM antenna and GP Santana. During installation please make sure the receiving side face is up with no metal object above the device to interfere with GPS reception. 5.2.4 For safety do NOT remove the fuse of device cable



5.4Steps of installation:



5.4.1Open the back covers; insert a SIM card to SIM card slot

5.4.2Switch power button up (power on)

5.4.3Connect the power code with the interface of device now three LED lights will lighting .Make sure the receiving side face up without any metal object shelter. The LED lights will flash after 1 to 5mins

It shows working normally

5.4.4 Close the back cover

5.4.5 Please ask professional technical to connect wires an d install to the vehicle. After correct installation the RED led will flashing 1 min. Later the BLUE led will flashing too. That shows installing completely



Cautions of device wiring:



6.1Power code wiring:



The standard voltage is 9V -100V. Please use the power line which provided by the manufacturer. The red line is the positive. The black line is the negative. The negative should earth alone or link iron during installing. Do not connect it to other ground wire. And please make sure the device is powered on status. (Power button on down position)Red Led light will flashing while device installed correctly GSM blue led light and GPS Green led light will flashing around 1 minutes later after getting signal



6.2 Usage of device:



Our GPS Tracker is used for motorcycle electric-bike two wheels and electric-bike three wheels.
As well as for car truck etc four wheels vehicle


Functions:



GPS satellite LBS base station dual model positioning
Vibration alarm (sensitivity is adjustable from 1 to 5 grade)
GEO-fence
Max voltage 100V Support battery voltage-detection
Low current consumption sleep mode
ACC detection
Remote control cut-off/on engine (petrol / electricity) ( need extra add relay)
Out off power alarm (built-in battery optional)
Waterproof