Foam Systems - Stainless Steel Tank 10 Min Foam Concentrate Nfpa 16 Compliant 68/79 Deg C Quartzoid Bulb Sprinklers Automatic Deluge Valve Connection Enhanced Hydrocarbon Fire Protection

We provide Foam Systems which is best performing and fires on Hydrocarbon are more frequent due to the volatility of the hydrocarbon and its property to not dissolve with water and lighter than water the fire extinguishing of hydrocarbon fire with water is not possible. In case of fire on Hydrocarbon if the water is sprayed due to the light weight of the hydrocarbon it will float on the water and reignite them to fire and due to the speed of water the fire will travel from one place to other place.Hence in this case where plant is using hydrocarbon the same should be protected with Foam Sprinkler system designed as per NFPA 16Foam shall be applied at a minimum density of 6.5 lpm/m2 of the exposed area of the plant.A minimum pressure of 1.4 bars shall be achieved at the hydraulically remotes sprayer. However pressure at the hydraulically favorable sprayer shall not exceed 3.5 bars.The sprayers shall be installed in rows at the ceiling level above the centre of plant floor and spaced at not more than 3M.Quartzoid Bulb Sprinklers (Q. B. S.)

Detection is used to for detection of fire which will be connected to deluge valve for auto operation of the system. Q B Sprinklers shall be of 68 Deg. Or 79 Deg. C depending upon the ambient temperature of the location of the plant.For foam concentrate (AFFF 3%) the foam tank made out of SS 304 with foam feeding inlet foam pick up tube and level indicator shall be provided. The foam concentrate shall be for 10 min.